Victron Smart IP22 SLA/Victron Smart Ip22 Sla/VoltX 12V 100Ah Slim LiFePO4 Battery
Couldn't load pickup availability
60 Days
Return
12 Months
Warranty
100% Secured
Payment & Data
Merry Savings Xmas Blow-Out
PLUS Get 20% off EVERYTHING
Pay only $799.20
Hurry! Promo ends 25/12/24 11:59 PM AEDT.
Use Code:
MERRY20
Selling fast. Hurry and order now to save 45%
PRODUCT HIGHLIGHTS
- Slim LiFePO4 comprised of prismatic cells & a built-in BMS
- High energy density for increased capacity in lightweight form
- 94% charger efficiency rate and Bluetooth connectivity
- Victron top quality charger with adaptive 6-stage charge algorithm
- Ideal combo for outdoor recreational, backup, and off-grid applications
MODEL 1: Victron Blue Smart IP22 SLA/LiFePO4 Charger
The famous Victron Blue Smart IP22 Charger is well-known for a reason. This compact device boasts Bluetooth compatibility, alLowing you to easily monitor your charging progress. Additionally, it also boasts advanced features geared towards increased protection and better overall charging efficiency.
High Efficiency
This charger recharges batteries fast with up to 94% efficiency rate. It also generates up to four times less heat, and once the battery is fully charged, power consumption is reduced to five or even 10 times better than the industry standard.
Adaptive 6-Stage Charge Algorithm
The Victron Smart charger features a 6-stage algorithm: test - bulk – absorption - recondition – float – storage. It also has a microprocessor-controlled ‘adaptive’ battery management, which alLows for an optimised charging process in accordance to the way the battery is being used.
Storage Mode
To provide additional battery protection, the Victron Charger is backed with a storage mode, which kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode, float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalise’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Night and Low Setting
Charge efficiently and with zero disturbance using the Night or Low mode. In this setting, the output current is reduced to max. 25% of the nominal output and the charger operates without any noise. The Night mode automatically ends after 8 hours, while the Low mode can be ended manually.
Protected Against Overheating
There’s no need to worry about overheating while charging here. The Victron charger’s output current will reduce as temperature increases up to 50°C, without compromising the performance of the charger itself.
MODEL 2: VoltX 12V 100Ah Slim LiFePO4 Battery
Intelligent BMS
Thanks to its built-in battery management system, this power pack delivers a stable, reliable output with every use. This BMS helps optimise every cell inside the battery and protects it from common battery issues including overcharge, over-discharge, overheat, and short circuits. Pack this on your next adventure for quality battery power that requires minimal maintenance during operation.
Maximum Battery Protection
Aside from the automatic protection against common battery problems, this power pack boasts an IP65 protection. It's designed to withstand the harsh Aussie outdoor elements, making it the best choice for your camping and caravan adventures. The sturdy, ABS case also adds to its overall durability, especially when used in 4WDs or 4x4s.
Increased Output
All VoltX batteries deliver real 100% capacity, alLowing you to use up every bit of power in the pack. This particular model can also be connected in parallel or series, perfect for powering a couple more appliances for longer periods.
Power up like a pro today and get this LiFePO4 battery, now bundled with the renowned Victron Smart Battery Charger.
IMPORTANT: While our LiFePO4 batteries are top-notch & can be wired with other batteries of its kind, it is not advisable to connect any LiFePO4 batteries in parallel or series. This poses several risks and should only be done in emergency situations. If you must wire batteries together, make sure you are familiar with the correct procedure or seek help from a professional if needed.
Suggestions From the Outbax Team
- Batteries connected in series should have the same amp-hour rating while batteries in parallel bank should have the same voltage rating.
- As much as possible, only connect batteries in series or parallel during emergency situations.
- It's better to go for batteries with higher voltage when running high-power electrical appliances instead of wiring two battery packs together.
- We have available batteries with larger discharge parameters for fast charge/discharge requirements.
- Our batteries are also available in 200Ah and 300Ah for larger capacity demands.
MODEL 1: Victron Blue Smart IP22 SLA/LiFePO4 Charger
| Input voltage range: | 180 - 265 VAC |
| Charge current, normal mode: | 15 / 20 / 30 A |
| Charge current, NIGHT or LOW: | 7.5 / 10 / 15 A |
| Efficiency: | 93 % |
| No load power consumption: | 0.5 W |
| Frequency: | 45 - 65 Hz |
| Number of outputs: | 1 |
| Charge Voltage Absorption: | Normal: 14.4V High: 14.7V Li-ion: 14.2V |
| Charge Voltage Float: | Normal: 13.8V High: 13.8V Li-ion: 13.5V |
| Charge Voltage Storage: | Normal: 13.2V High: 13.2V Li-ion: 13.5 V |
| Charge algorithm: | 6-stage adaptive |
| Can be used as power supply: | Yes |
| Protection: | Battery reverse polarity (fuse) Output short circuit Over temperature |
| Operating temp. range: | -40 to +60 °C (full rated output up to 40 °C) |
| Humidity (non-condensing): | Max 98 % |
|
ENCLOSURE |
|
| Material & Colour: | Aluminium (blue RAL 5012) |
| Battery connection: | Screw terminals 16 mm⊃ / AWG6 |
| 230 VAC connection: | Cable of 1.5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ) |
| Protection category: | IP22 |
| Dimensions: | 235(H) x 108(W) x 65(D) mm |
| Weight: | 1.3 kg |
|
STANDARDS |
|
| Safety : | EN 60335-1, EN 60335-2-29 |
| Emission: | EN 55014-1, EN 61000-6-3, EN 61000-3-2 |
| Immunity: | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
| Automotive: | ECE R10-5 |
MODEL 2: VoltX 12V 100Ah Slim Lithium Battery
| Nominal Capacity: | 100Ah |
| Usable Capacity: | 100Ah |
| Nominal Voltage: | 12.8V |
| Energy: | 1280Wh |
| Charge Voltage: | 14.6V |
| Discharge Cut-off Voltage: | 10V |
| Charge Method: | CC/CV |
| Charger: | 14.6V50A |
| Standard Discharge Current: | 100A |
| Max. Continues Discharge Current: | 100A |
| Max. Discharge Current (5sec): | 300A |
| Standard Charge Current: | 50A |
| Max. Charge Current: | 100A |
| Working Temperature Range Charge: | 0°C to 45°C Discharge:-20°C to 60°C |
| Storage Temperature: | -10°C to 50°C |
| Dimension: | 395(L) x 110(W) x 297(H)mm |
SKU:
| ac-bat-kits-06 |
- Your item will be shipped next business day.
- On average, items are delivered between 3 to 7 business days following shipping around Australia.
- Check out our shipping and delivery calculator above for more information.
- We can't ship products to PO Boxes, Parcel Lockers or Post Offices. We need to have an actual address to proceed with the order.
- Outbax offers a 12-month warranty on all products from the date of purchase unless otherwise stated. Outbax warrants its products against defects in materials and\/or workmanship. This is further to your rights under Australian Consumer Law.
- Outbax products come with a 60-day money-back guarantee. You must contact us within 60 days of receiving the product and it must return in its original condition.
Safe & Secure
We ensure secure processing of your payment information and do not retain or have any access to your credit card details.
YOU MAY ALSO BE INTERESTED IN..
-
Staff Pick -
Top Offer
VoltX 12V 100W Folding Solar Mat ETFE Kit
$499.00$999.00Unit price /Unavailable -
On sale
-
On sale -
On sale
-
Best seller
-
On sale
-
On sale
