Victron Smart IP22 SLA/VoltX 12V 100Ah Pro+ LiFePO4 Battery
Couldn't load pickup availability
60 Days
Return
12 Months
Warranty
100% Secured
Payment & Data
Merry Savings Xmas Blow-Out
PLUS Get 20% off EVERYTHING
Pay only $839.20
Hurry! Promo ends 25/12/24 11:59 PM AEDT.
Use Code:
MERRY20
Selling fast. Hurry and order now to save 50%
PRODUCT HIGHLIGHTS
- LiFePO4 comprised of prismatic cells & a built-in BMS
- High energy density for increased capacity in lightweight form
- 94% charger efficiency rate and Bluetooth connectivity
- Victron top quality charger with adaptive 6-stage charge algorithm
- Ideal combo for outdoor recreational, backup, and off-grid applications
MODEL 1: Victron Blue Smart IP22 SLA/LiFePO4 Charger
Every great battery needs an equally great charger. Fortunately, we are bundling our best power packs with the renowned Victron Smart Battery Charger! Backed by cutting-edge technology, this alLows for fast, optimal charging, contributing to the overall efficiency of your portable power experience.
Unrivalled Charging Efficiency
Recharge your batteries conveniently and effectively with up to 94% efficiency rate. This charger also generates up to four times less heat, and once the battery is fully charged, power consumption is reduced to five or even 10 times better than the industry standard.
Adaptive 6-Stage Charge Algorithm
Enjoy optimised charging tailored to how your battery is being used with this charger’s adaptive charging method. The Victron Smart charger also features a 6-stage algorithm: test - bulk – absorption - recondition – float – storage.
Storage Mode
The storage mode kicks in whenever the battery has not been subjected to discharge during 24 hours. In the storage mode, float voltage is reduced to 2,2V/cell (13,2V for a 12V battery) to minimise gassing and corrosion of the positive plates. Once a week the voltage is raised back to the absorption level to ‘equalise’ the battery. This feature prevents stratification of the electrolyte and sulfation, a major cause of early battery failure.
Night and Low Setting
Need to charge in the evening? No worries–when in Night or Low mode, Victron’s output current is reduced to max. 25% of the nominal output and the charger operates quietly to avoid disturbance. The Night mode automatically ends after 8 hours, while the Low mode can be ended manually.
Protected Against Overheating
One of Victron charger’s best features is the automatic protection against overheating for extra user safety. This means the output current will reduce as temperature increases up to 50°C, without compromising the performance of the charger itself.
MODEL 2: VoltX 12V 100Ah Pro+ LiFePO4 Battery
The VoltX Pro+ Model is the best go-to choice whether you need an outdoor battery or backup power for your home in case of emergency. This standard 100Ah battery is everything you could want in a battery pack, and is now made even better paired with a high quality charger.
Top-notch Composition
Manufactured using grade-A prismatic cells and an integrated battery management system (BMS), this VoltX battery is engineered for greatness, no matter where you use it. It provides stable, long-lasting output, plus, the presence of BMS alLows for automatic battery cell optimisation and increased protection from common issues that may damage your power pack.
Long Lifespan
Our LiFePO4 batteries can reach up to 4000+ cycles or 7-10 years with proper usage and maintenance. Couple it with unparalleled performance and you’re sure to get great value for your money. Additionally, our power packs are designed to fare better in extreme conditions compared to other battery packs in the market, making them perfect for every adventurer.
Winning Versatility
Powerful, eco-friendly, safe, and efficient, the VoltX Pro+ LifePO4 Battery makes a great companion on camping trips, road trips, off-grid vacations, and even at home. You get 100% real capacity, a maintenance-free yet effective operation, and safe portable power experience.
What are you waiting for? Get it now and don’t miss our bundle offer!
IMPORTANT: While our LiFePO4 batteries are top-notch & can be wired with other batteries of its kind, it is not advisable to connect any LiFePO4 batteries in parallel or series. This poses several risks and should only be done in emergency situations. If you must wire batteries together, make sure you are familiar with the correct procedure or seek help from a professional if needed.
Suggestions From the Outbax Team
- Batteries connected in series should have the same amp-hour rating while batteries in parallel bank should have the same voltage rating.
- As much as possible, only connect batteries in series or parallel during emergency situations.
- It's better to go for batteries with higher voltage when running high-power electrical appliances instead of wiring two battery packs together.
- We have available batteries with larger discharge parameters for fast charge/discharge requirements.
- Our batteries are also available in 200Ah and 300Ah for larger capacity demands.
MODEL 1: Victron Blue Smart IP22 SLA/LiFePO4 Charger
| Input voltage range: | 180 - 265 VAC |
| Charge current, normal mode: | 15 / 20 / 30 A |
| Charge current, NIGHT or LOW: | 7.5 / 10 / 15 A |
| Efficiency: | 93 % |
| No load power consumption: | 0.5 W |
| Frequency: | 45 - 65 Hz |
| Number of outputs: | 1 |
| Charge Voltage Absorption: |
Normal: 14.4V High: 14.7V Li-ion: 14.2V |
| Charge Voltage Float: |
Normal: 13.8V High: 13.8V Li-ion: 13.5V |
| Charge Voltage Storage: |
Normal: 13.2V High: 13.2V Li-ion: 13.5 V |
| Charge algorithm: | 6-stage adaptive |
| Can be used as power supply: | Yes |
| Protection: | Battery reverse polarity (fuse) Output short circuit Over temperature |
| Operating temp. range: | -40 to +60 °C (full rated output up to 40 °C) |
| Humidity (non-condensing): | Max 98 % |
ENCLOSURE |
|
| Material & Colour: | Aluminium (blue RAL 5012) |
| Battery connection: | Screw terminals 16 mm⊃ / AWG6 |
| 230 VAC connection: | Cable of 1.5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ) |
| Protection category: | IP22 |
| Dimensions: | 235(H) x 108(W) x 65(D) mm |
| Weight: | 1.3 kg |
STANDARDS |
|
| Safety : | EN 60335-1, EN 60335-2-29 |
| Emission: | EN 55014-1, EN 61000-6-3, EN 61000-3-2 |
| Immunity: | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
| Automotive: | ECE R10-5 |
MODEL 2: VoltX 12V 100Ah Lithium Iron Phosphate Battery
| Nominal Capacity: | 100Ah |
| Usable Capacity: | 100Ah |
| Nominal Voltage: | 12.8V |
| Energy: | 1280Wh |
| Charge Voltage: | 14.6V |
| Discharge Cut-off Voltage: | 10V |
| Charge Method: | CC/CV |
| Charger: | 14.6V 50A |
| Standard Discharge Current | 100A |
| Max. Continues Discharge Current: | 100A |
| Max. Discharge Current (5sec): | 300A |
| Standard Charge Current: | 50A |
| Max. Charge Current: | 100A |
| Working Temperature Range Charge: | 0°C to 45°C Discharge:-20°C to 60°C |
| Storage Temperature: | -10°C to 50°C |
| Dimension: | 306(L) x 169(W) x 215(H)mm |
SKU:
| ac-bat-kits-08 |
- Your item will be shipped next business day.
- On average, items are delivered between 3 to 7 business days following shipping around Australia.
- Check out our shipping and delivery calculator above for more information.
- We can't ship products to PO Boxes, Parcel Lockers or Post Offices. We need to have an actual address to proceed with the order.
- Outbax offers a 12-month warranty on all products from the date of purchase unless otherwise stated. Outbax warrants its products against defects in materials and\/or workmanship. This is further to your rights under Australian Consumer Law.
- Outbax products come with a 60-day money-back guarantee. You must contact us within 60 days of receiving the product and it must return in its original condition.
Safe & Secure
We ensure secure processing of your payment information and do not retain or have any access to your credit card details.
YOU MAY ALSO BE INTERESTED IN..
-
Staff Pick -
Top Offer
VoltX 12V 100W Folding Solar Mat ETFE Kit
$499.00$999.00Unit price /Unavailable -
On sale
-
On sale -
On sale
-
Best seller
-
On sale
-
On sale
