Victron Smart IP22 SLA/VoltX 12V 200Ah Slim LiFePO4 Battery
Couldn't load pickup availability
60 Days
Return
12 Months
Warranty
100% Secured
Payment & Data
Merry Savings Xmas Blow-Out
PLUS Get 20% off EVERYTHING
Pay only $1,279.20
Hurry! Promo ends 25/12/24 11:59 PM AEDT.
Use Code:
MERRY20
Selling fast. Hurry and order now to save 41%
PRODUCT HIGHLIGHTS
- Slim LiFePO4 comprised of prismatic cells & a built-in BMS
- High energy density for increased capacity in lightweight form
- 94% charger efficiency rate and Bluetooth connectivity
- Victron top quality charger with adaptive 6-stage charge algorithm
- Ideal combo for outdoor recreational, backup, and off-grid applications
MODEL 1:Victron Blue Smart IP22 SLA/LiFePO4 Charger
The Victron Smart Battery Charger is engineered for fast, effective, and safe recharging of portable batteries whether lead-acid or lithium. Bluetooth-compatible and equipped with a 6-charge algorithm, this is the perfect pair to our premium VoltX LiFePO4 Batteries.
High-level Efficiency
Recharge your batteries quickly with a maximum efficiency rate of up to 94%. The Victron Smart Charger combines functionality with safety, producing four times less heat than other chargers. Furthermore, once the battery is fully charged, its power consumption is five to ten times lower than the industry standard.
Easy Tracking & 6-Stage Charge Algorithm
Aside from easy monitoring via Bluetooth, the Victron Smart charger features a 6-stage algorithm: test - bulk – absorption - recondition – float – storage. It also has a microprocessor-controlled ‘adaptive’ battery management, which allows for an optimised charging process in accordance to the way the battery is being used.
Storage Mode
Giving your battery a break? Ensure it stays in top condition with Victron’s storage mode, which activates when the battery hasn't discharged for 24 hours. In storage mode, the float voltage is reduced to 2.2V per cell (13.2V for a 12V battery) to minimize gassing and corrosion of the positive plates. Once a week, the voltage is raised back to the absorption level to equalize the battery. This feature prevents electrolyte stratification and sulfation, a leading cause of premature battery failure.
Night and Low setting
When in Night or Low mode, the output current is reduced to max. 25% of the nominal output and the charger operates without any noise. The Night mode automatically ends after 8 hours, while the LOW mode can be ended manually.
Protected against overheating
Overheating is one of the top enemies of a battery. Thanks to Victron’s automatic protection, its output current will reduce as temperature increases up to 50°C, without compromising the performance of the charger itself.
MODEL 2: VoltX 12V 200Ah Slim LiFePO4 Battery
Need higher battery capacity but don’t have the space for it? Our VoltX 12V 200Ah Slim LiFePO4 Battery is just what you need to power up! Packed with 100% real capacity, you get to use up every bit of that power juice to keep your essentials running until the end of your adventure.
Top-quality Prismatic Cells
Our high-grade prismatic battery cells provide better stability compared to the usual cylindrical battery cells. This translates to overall better performance, making this battery a great choice for camping, RVs, and even home backup.
Sturdy Exterior
With an IP65 rating, this battery is designed to withstand the harsh Aussie outdoor conditions. The battery case is also made with flame retardant material for increased user safety, perfect for both first time and seasoned battery users.
Parallel-capable
Have a couple more appliances to power? Staying longer in your favourite campsite? Connect this VoltX battery in parallel for increased output. You won’t have to worry about cramping your campsite either, thanks to its space-saving build!
Sounds awesome, right? Don't miss our bundle offer and get both premium power equipment in one purchase.
IMPORTANT: While our LiFePO4 batteries are top-notch & can be wired with other batteries of its kind, it is not advisable to connect any LiFePO4 batteries in parallel or series. This poses several risks and should only be done in emergency situations. If you must wire batteries together, make sure you are familiar with the correct procedure or seek help from a professional if needed.
Suggestions From the Outbax Team
- Batteries connected in series should have the same amp-hour rating while batteries in parallel bank should have the same voltage rating.
- As much as possible, only connect batteries in series or parallel during emergency situations.
- It's better to go for batteries with higher voltage when running high-power electrical appliances instead of wiring two battery packs together.
- We have available batteries with larger discharge parameters for fast charge/discharge requirements.
- Our batteries are also available in 200Ah and 300Ah for larger capacity demands.
MODEL 1: Victron Blue Smart IP22 SLA/LiFePO4 Charger
| Input voltage range: | 180 - 265 VAC |
| Charge current, normal mode: | 15 / 20 / 30 A |
| Charge current, NIGHT or LOW: | 7.5 / 10 / 15 A |
| Efficiency: | 93 % |
| No load power consumption: | 0.5 W |
| Frequency: | 45 - 65 Hz |
| Number of outputs: | 1 |
| Charge Voltage Absorption: |
Normal: 14.4V High: 14.7V Li-ion: 14.2V |
| Charge Voltage Float: |
Normal: 13.8V High: 13.8V Li-ion: 13.5V |
| Charge Voltage Storage: |
Normal: 13.2V High: 13.2V Li-ion: 13.5 V |
| Charge algorithm: | 6-stage adaptive |
| Can be used as power supply: | Yes |
| Protection: |
Battery reverse polarity (fuse) Output short circuit Over temperature |
| Operating temp. range: | -40 to +60 °C (full rated output up to 40 °C) |
| Humidity (non-condensing): | Max 98 % |
|
ENCLOSURE |
|
| Material & Colour: | Aluminium (blue RAL 5012) |
| Battery connection: | Screw terminals 16 mm⊃ / AWG6 |
| 230 VAC connection: | Cable of 1.5 meter with CEE 7/7 plug, BS 1363 plug (UK) or AS/NZS 3112 plug (AU/NZ) |
| Protection category: | IP22 |
| Dimensions: | 235(H) x 108(W) x 65(D) mm |
| Weight: | 1.3 kg |
|
STANDARDS |
|
| Safety : | EN 60335-1, EN 60335-2-29 |
| Emission: | EN 55014-1, EN 61000-6-3, EN 61000-3-2 |
| Immunity: | EN 55014-2, EN 61000-6-1, EN 61000-6-2, EN 61000-3-3 |
| Automotive: | ECE R10-5 |
MODEL 2: VoltX 12V 200Ah Lithium Iron Phosphate Battery
| Nominal Capacity: | 200Ah |
| Usable Capacity: | 200Ah |
| Nominal Voltage: | 12.8V |
| Energy: | 2560Wh |
| Charge Voltage: | 14.6V |
| Discharge Cut-off Voltage: | 10V |
| Charge Method: | CC/CV |
| Charger: | 14.6V 50A |
| Max. Continues Discharge Current: | 150A |
| Max. Discharge Current (5sec): | 450A |
| Standard Charge Current: | 50A |
| Max. Charge Current: | 100A |
| Working Temperature Range Charge: |
0°C to 45°C Discharge:-20°C to 60°C |
| Storage Temperature: | -10°C to 50°C |
| Dimension: | 552(L) x 110(W) x 290(H)mm |
SKU:
| ac-bat-kits-07 |
- Your item will be shipped next business day.
- On average, items are delivered between 3 to 7 business days following shipping around Australia.
- Check out our shipping and delivery calculator above for more information.
- We can't ship products to PO Boxes, Parcel Lockers or Post Offices. We need to have an actual address to proceed with the order.
- Outbax offers a 12-month warranty on all products from the date of purchase unless otherwise stated. Outbax warrants its products against defects in materials and\/or workmanship. This is further to your rights under Australian Consumer Law.
- Outbax products come with a 60-day money-back guarantee. You must contact us within 60 days of receiving the product and it must return in its original condition.
Safe & Secure
We ensure secure processing of your payment information and do not retain or have any access to your credit card details.
YOU MAY ALSO BE INTERESTED IN..
-
Staff Pick -
Top Offer
VoltX 12V 100W Folding Solar Mat ETFE Kit
$499.00$999.00Unit price /Unavailable -
On sale
-
On sale -
On sale
-
Best seller
-
On sale
-
On sale
